Install sheer curtains under drapes

Install the curtain rod brackets into studs with the 2 included screws. Feed the sheer panel onto the smaller drapery rod. Place rod and sheers onto the back notch of the brackets. Unscrew the finial decorative end piece from one end of the rod. Should sheer curtains touch the floor? Floor-length sheers should end one to two inches above the floor if they are hung beneath another curtain. However, sheers can go to greater lengths if they stand alone. For a soft and romantic look, add an additional three to four inches for "breaking" sheers, or 12 to 15 inches for sheers that puddle.

Do curtains have to touch the floor? The fabric should just touch the floor or hover half an inch above. How do you hang sheer curtains without a rod? Mount hooks or knobs in a row above your window, either on a backing board or directly on the wall, and use them to hang curtains fitted with grommets, tab- or tie-tops, buttonholes or tab-backs. Tension Wire, Rope and Cording. Crafty Ideas. Wire Hangers.

Do sheer curtains go in front or behind? In days gone by, sheers usually sat closer to the glass and the blockout or heavier drapes took pride of place in front. Generally the heavier curtains were the more decorative. This is still acceptable, especially if the main fabric is patterned or to be a feature.

Can you see through sheer curtains? Sheer curtains and drapes are a beautiful, breezy way to add light and airy texture to your window without a lot of fuss. OP, you use a special kind of double rod that has one rod behind the other. You only need one set of brackets to attach the double rod to the wall. The sheers go on the inner rod , and the decorative panels go on the outer one. Like with curtains , you want your sheers to have a bit of a wave to them.

With the height, if used in conjunction with a floor length curtain , you can either have the sheer the same length or just an inch shorter or only have the sheers hang down to the sill.

Install the curtain rod brackets into studs with the 2 included screws. Feed the sheer panel onto the smaller drapery rod. Place rod and sheers onto the back notch of the brackets. Unscrew the finial decorative end piece from one end of the rod. Should sheer curtains touch the floor? Floor-length sheers should end one to two inches above the floor if they are hung beneath another curtain.

However, sheers can go to greater lengths if they stand alone. For a soft and romantic look, add an additional three to four inches for "breaking" sheers, or 12 to 15 inches for sheers that puddle. Do curtains have to touch the floor? The fabric should just touch the floor or hover half an inch above.

How do you hang sheer curtains without a rod? Mount hooks or knobs in a row above your window, either on a backing board or directly on the wall, and use them to hang curtains fitted with grommets, tab- or tie-tops, buttonholes or tab-backs. Tension Wire, Rope and Cording. Crafty Ideas. Wire Hangers. Do sheer curtains go in front or behind?

Adding a pair of drapery tiebacks is a simple way to adjust the folds of the drapes. Buy two different curtain rods. The rod needs to come out no more than 2 inches from the window. Heavier drapes will need a curtain rod that supports the material. The distance it comes out from the window will depend upon the weight of the material and the curtain rod itself, but it should come out at least 4 inches. The sheer curtain can be hung inside the window frame or on the frame.

If it is placed on the frame, position it so that it is 2 inches from the outer side of the window frame. Install the drapes' hardware.